Description
The AS07-0183, combines GPS/Glonass positioning and 3-axis digital compass sensors in one compact case. It can be connected directly to a Chartplotter or NMEA listener/multiplexer of your choice. This eliminates the need to install a GPS antenna and separate electronic compass. Only one installation is required, saving installation time and cost.
The AS07-0183 features superior sensitivity for consistent signal acquisition, reliable position and heading sensor accuracy, and accurate speed and course-over-ground readings. The AS07-0183 is designed for marine environments and suitable for other outdoor and vehicular use, with an IPX6 waterproof enclosure. The AS07-0183 is a compact size and is suitable for flush-mount, pole-mount, or rail-mount installation.
What is the difference between a GPS antenna and a GPS sensor?
The AS07-0183 is not merely a GPS antenna (to be connected to a GPS receiver), but a GPS sensor is a GPS antenna and GPS receiver combined. In addition to being a full GPS sensor, the AS07-0183 also has the added functionality of providing heading data.
Simply connect the AS07-0183 directly to the NMEA 0183 input device and 12V/24V power. It will instantly output all positional and heading data (NMEA 0183 messages) with no need for additional configuration.
Having GPS data and heading combined, provides a total data set of GPS, heading, speed and course over water/ground data. The AS07-0183 also has an internal filter so it can be configured to output less data if not all data types are desired.
Features
| Feature | Description |
|---|---|
| NMEA 0183 Connection | RS232 and RS422 for instant positional data |
| Supported GNSS Systems | GPS, GLONASS |
| Compass Sensor | 3-axis digital compass |
| Compass Accuracy (Steady) | 3° heading accuracy |
| Compass Accuracy (Dynamic) | Up to 5° heading accuracy (pitch/roll up to 30°) |
| Beidou Support | Ready (enabled via future firmware update) |
| Update Rate | 1 Hz default, configurable 1–10 Hz |
| Power Consumption | <45 mA at 12 V DC |
| USB Output | Supported via included USB adapter |
| Waterproof Rating | IPX6 enclosure |
| Configuration Requirement | Initial configuration requires Windows OS |
Available to buy with this item
NMEA Multiplexers and NMEA Converters:
- A031 NMEA 0183 Multiplexer with SeaTalk Converter
- A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi
- -A033 Bi-directional NMEA 0183 Multiplexer with SeaTalk Converter
- A034 Bi-directional NMEA 2000 to WIFI and USB Multiplexer with NMEA 0183 and SeaTalk input options










