Raymarine TackTick T122 and A026—-solved

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 30, 2020 at 5:18 pm #13747
    Quark Elec
    Keymaster

      Hello, If I use the NMEA output from the T122 and connect it to the NMEA input on the A026 should I be able to get data sent though Wi-Fi to an app like EMEAremote? Thanks

      May 30, 2020 at 5:22 pm #14984
      Anonymous

        Make sure the baud rate at both side must be the same and reversing two differential wires(+ and -) if needed, then I cannot see any reason it won’t work, good luck.

        May 31, 2020 at 9:16 am #14985
        Quark Elec
        Keymaster

          Works perfectly, super chuffed. It was the Baud rate and cable connections.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.