QK-A032-AIS and Raymarine SeatalkNg

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 25, 2021 at 9:17 pm #17051
    Quark Elec
    Keymaster

      Hi,

      I have QK-A032-AIS and I have connected the NMEA 2000 wire output to the SatalkNg bus.

      After the connection, the Raymarine display (p70s) don’t detect anymore Acu-100 and Ev-1 Raymarine Components.

      However, the display show the correct SOG from NMEA 2000 wire.

      Haw can I solve the problem?

      Thanks,

      Alessandro

      August 26, 2021 at 8:27 am #17059
      Quark Elec
      Keymaster

        Hi Alessandro,

        Sorry to hear that you are having issue with your A032-AIS device. Just want to understand the situation better. Did you connect the A032-AIS N2K output to your backbone where your other N2K devices are connected to? Did you set the N2K output baud rate to 38.4kbps and also what is connected to the NMEA 0183 port?

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.