MLR FX312 GPS receiver to A031 input—solved(also discussed FX412)

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 2, 2020 at 10:39 am #13703
    Quark Elec
    Keymaster

      My brookhouse mux has broken down and it can’t be repaired anymore so I brought a QK-A031 from a local marine shop. However, it doesn’t work well so far.

      The problem is after connecting MLR FX312 to input1, the blue LED doesn’t flashing. I have already set up the baud rate as 4800bps as manual suggested. How to proceed now? It worked with brookhouse mux before.

      March 2, 2020 at 10:46 am #14845
      Anonymous

        Hi Raul,

        Thanks for your information. I believe swapping to NMEA output wires will get it to work. Keep us updated, please.

        March 2, 2020 at 11:13 am #14846
        Quark Elec
        Keymaster

          Thank you. It works well now once swapping two NMEA output wires.

          March 3, 2020 at 12:07 pm #14847
          Anonymous

            This is the same on MLR FX412, two NMEA output wires from FX412 need to be swapped on A031 input.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.