- This topic has 3 replies, 2 voices, and was last updated 2 years, 11 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Yes, it should work by swapping two NMEA wires:
+ —> – and – —-> +. Also please make sure the baud rate at each side should be the same.
Yes, it should work by swapping two NMEA wires:
+ —> – and – —-> +. Also please make sure the baud rate at each side should be the same.
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.