- This topic has 1 reply, 1 voice, and was last updated 3 years ago by
.
-
Posts
-
The A034 works well as it should be. Today, we’ve been trying to get it to connect to our 4G router on board today and have had no luck.The model number of the router – it’s a Huasifei ZBT-WE1026.
We’ve followed the instruction in the A034 manual to configure it for station mode, but it doesn’t connect to the router and we’re not sure why. The Wifi light on the A034 does not flash to indicate that it is sending any data.
To connect the A034(the same as all of our WiFi products) to a router via WiFi, the password should withing 8 to 12 characters and allows DHCP protocol. Most of our customers get the stations mode work straightforward, however if you have issue with it please try below:
1, double check the SSID and password are correct(check there is a extra ‘space’ on your setting?)
2, try to assign a static IP address to A034.
3, Use a dedicate SSID for A034(some routher call this as Guest network). For your ZBT-WE1026, we believe it will work by doing this. Good luck.
- You must be logged in to reply to this topic.