A028 using GPS signal from NMEA network

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 10, 2020 at 10:45 am #13735
    Quark Elec
    Keymaster

      Just brought A028 AIS receiver. I would like to use the internal GPS signal from the SIMRAD plotter as recover of AIS data. How can I setup this?

      July 10, 2020 at 5:24 pm #14949
      Anonymous

        A028 itself doesn’t have an option so you can disable the GPS output, but most chart plotter or MFD allows you to choose the GPS data source. Hope this helps.

        July 11, 2020 at 8:36 am #14950
        Quark Elec
        Keymaster

          OK, so you mean that I need to have either GPS or AIS signal connected into the A028 device. Is this correctly understood

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.