- This topic has 1 reply, 2 voices, and was last updated 3 years, 11 months ago by
.
-
Posts
-
1. The device have been working perfectly with my pc for 2 months since February. During the last month the device keeps loosing gps every 2 – 3 sec. If i unplug the device from power for about 15 minutes and plug it again it works perfectly for about 2 hours and after that the problem consists.
2. From the first time i bought it i tried to connect the device to Simrad Simnet. The Gps and Ais Receiver was working fine (not anymore as the above described problem exists) but the question is that after connecting it to simnet the B&G wind sensor was not working anymore. The Simrad couldnt see it at all. On the simnet are attached the following devices:
Simrad NSE-8 MFD,
SimRad 4G Radar,
B&g WindSensor and MFD.
I am using a 3A 12Volt Power Supply which is more than enough to power the devices (Radar has its own power supply).
Thanks in advance.Hi !
Could you please email us a small diagram of your network including connection types, any relevant BAUD rates and model/part numbers for connected devices.
https://www.quark-elec.com/contact-information/
Tech Team
- You must be logged in to reply to this topic.