A027+ no gps signal to Raymarine n2k system

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 19, 2022 at 5:30 pm #20004
    Quark Elec
    Keymaster

      I have connected an A027+ to the raymarine backbone via the raymarine adaptor cable.  The Green light is on for the GPS and N2k transmit and I see the A027+ in the network check but I have no GPS data shown on the ray displays and get an alarm indicating no gps fix.  The raymarine set up functions only show “auto” for GPS select.  How do I get the gps single to the i70s display?

      September 21, 2022 at 4:06 pm #20011
      Quark Elec
      Keymaster

        If the weather conditions are not favourable, it might take a bit longer time for the receiver to get a GPS fix. Probably during this time, the chart plotter will not allow you to select the A027+ as a GPS data source. You probably need wait until the A027+ gets a GPS fix first.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.