A024 unstable connection to navionics android—solved by setting up with the same ip and gateway address

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 11, 2020 at 12:32 pm #13718
    Quark Elec
    Keymaster

      I have installed A024. It works ok to my Gpsmap 4012 and to my Android tablet. But the wifi is unstable. It keeps diconecting and reconecting continuesly. The A024 is powered with quark power supply. I have tride static configuration of ip. Same behavior. Any idea what kan help.

      May 11, 2020 at 1:02 pm #14889
      Anonymous

        Navionics will disable the connection if there is no valid AIS messages received within a few seconds(not sure exactly period, but around 10 seconds). Is this helps?

        Also please try to use the static address rather than DHCP under station mode.

        May 14, 2020 at 5:51 pm #14888
        Anonymous

          We recently have a customer complained the WiFi connections didn’t steady. After checking the returned A026, we noticed the ip address and gateway ip were different under ad-hoc mode(checking via Configuration tool). After changing the gateway address to be the same as the server one, it works well.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.