Hello Quark,

I purchased a A026 and works fine through wifi with iPad and navionics for GPS and AIS data.
Now I want to connect the NMEA out of th A026 with a Navman VHF 7100.
The VHF has a bus connection with 2 wires for GPS NMEA in (yellow + and green -)
If I connect these wires to the corresponding connector on the Quark the VHF is not receiving GPS data.
I tried on both 34800 en 4800 baud setting of the Quark output.

Could you help me on this ?

Regards,
Mees